PHP31-CB09, PHP32-CB09, PHP32-CB09N (Blue tipped) |
Blade |
Description of Cut |
Materials |
CB09UA |
Standard blade for cutting adhesive material. Suitable for cutting media up to 10 mil thick. |
Vinyl, Rubylithe, Reflective |
| |
PHP31-CB15, PHP32-CB15, PHP32-CB15N (Red tipped) |
Blade |
Description of Cut |
Materials |
CB15U |
For cutting media which is too thick for the CB09UA blade to handle. Suitable for cutting material up to 25 mil thick |
Chip board (packaging), art board, gasket, plastic sheets |
CB15U-K30 |
For cutting sandblast rubber. The sharply angled point provides a longer cutting edge. Suitable for cutting material up to 35 mil. |
Sandblast rubber |
CB15UA |
Same material as the CB15UA but most designed for cutting High Intensity reflective |
High Intensity reflective |
CB15UA-K30 |
For cutting sandblast rubber. The sharply angled point provides a longer cutting edge and the ability to cut harder materials. Suitable for cutting material up to 35 mil. |
Sandblast rubber, High Intensity reflective. |
CB15-10C
Ceramic |
This is the hardest blade, but may chip or shatter if dropped or subjected to impact. Suitable for cutting material up to 25 mil |
|
CB15-05S
Sapphire |
For cutting masking media and for intricate cutting |
Rubylithe® , Amberlithe® |
|
PHP31-CB15SP |
Blade |
Description of Cut |
Materials |
CB15U-5SP |
For cutting media which is too thick for the CB09UA blade to handle. Suitable for cutting material up to 25 mil thick |
Chip board (packaging), art board, gasket, plastic sheets |
CB15U-K30SP |
For cutting sandblast rubber. The sharply angled point provides a longer cutting edge. Suitable for cutting material up to 35 mil. |
Sandblast rubber |
