Telephone - 0845 130 5565
Email Us FC7000
(Specifications subject to change without notice)
general .
|
FC7000
Series Specifications |
||||
|---|---|---|---|---|
|
Parameter |
FC7000-75 |
FC7000-130 |
FC7000-160 |
|
| CPU | 32-bit | |||
|
Configuration |
Digital Servo Friction feed with MicroGritrollTM drive |
|||
|
Maximum cutting area (expanded mode) |
30.0
in. x 164' |
54.0
in. x 164' (1372 mm x 50 m) |
64.0
in. x 164' (1626 mm x 50 m) |
|
|
Compatible film width |
2.9
in. to 36.2 in. (74 mm to 920 mm) |
2.9
in. to 60.2 in. (74 mm to 1529 mm) |
2.9
in. to 72.2 in. (74 mm to 1834) |
|
| Maximum auto cross cutting width | 35.0 in. 47.0 in. 59.0 in. | 69.0 in. | ||
|
Maximum cutting speed |
58.5
in./s (1485 mm/s) |
|||
| Programmable axial cutting speeds | 0.4
to 41.3 in./s in 105 steps (10 to 1050 mm/s) |
|||
| Maximum axial acceleration | 4.0
G
|
|||
|
Programmable cutting force |
20 to 600g in 40 steps (0.196N to 5.88N) |
|||
|
Minimum character matrix |
Approximately
0.125 in. high |
|||
|
Mechanical resolution |
0.0002
in. |
|||
|
Programmable step size |
GP-GLTM:
0.0004 in.; HP-GL® emulation: 0.001
in. |
|||
|
Repeatability*1 |
0.0039
in. over 80 in. travel or better |
|||
|
Number of tool holders |
1 (accepts cutting blade, plotting pen, and pouncing tool) |
|||
|
Blade types |
Supersteel,
ceramic, sapphire, |
|||
|
Pen types |
Water-based fibertip, roller ball, and ceramic tip |
|||
|
Film types |
Self-adhesive vinyl film, fluorescent film, reflective film, AmberlithTM, RubylithTM, sandblast resist rubber, etc. |
|||
|
Pouncing
function |
Standard
with multi-functional plotting surface for cutting, plotting,
and pouncing (requires optional pouncing tool) |
|||
|
Interfaces |
RS-232C serial/Centronics parallel (auto recognition)/USB |
|||
| Data buffer | 2 Mbytes | |||
|
Command set |
GP-GLTM/HP-GL® (control panel selectable) |
|||
|
Control menu & status display |
20 digits by 4 lines LCD with comprehensive icon corresponding soft keys |
|||
|
Axis
alignment |
Standard
precision registration mark sensor for registration of pre-printed
digital image |
|||
|
Media
supply mechanism |
Integrated
AcculoadT media supply system Optional media rack for simultaneously holding up to 3 rolls of media |
|||
|
Media
pre-feed |
Standard
(built-in SmartFeedT function automatically unwinds and pre-feeds
media for an operator specified distance upon self-recognition
of plot file length) |
|||
|
Floor
stand |
Standard |
Standard
Standard |
Standard |
|
|
Power requirement |
100-240 VAC, 48-62 Hz; auto switching, 120 VA max. |
|||
|
Operating environment |
50° to 95°F (10° to 35°C), 35% to 75% RH (non-condensing) |
|||
| Guaranteed accuracy environment |
50° to 90°F (16° to 32°C), 35% to 70% RH (non-condensing) |
|||
| Standard software | Cutting MasterTM plug-in software, QuickCutTM plug-in software, Cutting Plotter Controller software (Windows®/Mac® compatible) | |||
| Options | Additional Media Rack, Pouncing Tool, Media Catch Basket, Registration/Axis Alignment Loupe | |||
| Factory installed options | Second penholder | |||
| Footnotes | |
| *1 | When operated with Graphtec-specified media and conditions |
All trademarks acknowledged.
Specifications subject to change without notice.
Details . Specifications . Accessories/Supplies
 Follow us on Facebook |
|
