FC4200 Series Specifications
|
|
Parameter |
FC4200-50 |
FC4200-60 |
FC4210-60 |
|
Configuration |
Flatbed |
|
Drive |
Digital servo system |
|
Effective cutting area |
23.2 in. x 16.9 in.
(590 mm. x 430 mm.)
35.9 in. x 24.0 in.
(910 mm. x 610 mm.) |
33.9
in. x 23.6 in.
(860 mm. x 600 mm.) |
|
Maximum loadable film width |
19.7 in.
(500 mm.) |
26.2 in.
(666 mm.) |
|
Medium hold-down surface |
Electrostatic adhesion sheet
Polyvinyl sheet |
Adhesive
mat or adhesive sheet |
|
Maximum cutting speed |
25.6 in./sec
(650 mm./sec) |
|
Settable cutting speeds |
1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 cm/sec |
|
Cutting force |
10 to 600 gf |
|
Mechanical resolution |
.0002 in.
(0.005 mm.) |
|
Programmable resolution |
GP-GLT: .004 in., .002 in., .001 in., .0004 in.; HP-GL®: .001
in.
(GP-GLT: 0.1 mm., 0.05 mm., 0.025 mm., 0.01
mm.; HP-GL®: 0.025 mm.) |
|
Repeatability |
Within
.0039 in. *1
(0.1 mm.) |
|
Distance accuracy |
Within ±0.2% of the distance moved or ±0.1 mm.
- whichever is greater *1 |
|
Perpendicularity |
Within 0.012 in./16.9 in.
(0.3 mm./430 mm.) |
Within 0.016 in./24.0 in.
(0.4 mm./610 mm.) |
|
Registration mark reading accuracy |
Within 0.012 in. *2
(0.3 mm.) |
0.008 in.
(0.2 mm.) |
|
Number of cutters/pens |
Two (one cutter and one pen) |
One (creasing tool) |
|
Cutter and pen types |
Cutter blade: supersteel
Pens: Water-based ballpoint, oil-based ballpoint |
|
Media types |
- Marking
film (self-adhesive, fluorescent, and reflective
vinyl) Stiff
paper/card (for stencils, etc.) up to 20 mil. thick *3
(0.5 mm.) Compressed foam sheets up to 30 mil. thick*4
(0.8 mm) Sandblast
rubber up to 60 mil. thick *4
(1.5 mm)
- High-intensity reflective film *5
|
- Cardboards
/ Paper boards 20 mil. (0.5 mm.) Compressed
foam sheets 30 mil. (0.8 mm.) Sandblast
rubber 60 mil.
(1.5 mm.)
- Microflute:
F & G grade
|
|
Interfaces |
RS-232C serial and Centronics parallel (auto interface recognition) |
|
Buffer capacity |
2 MB |
|
Command sets |
GP-GLT and HP-GL® emulation (control panel selectable) |
|
LCD display |
20 characters x 2 rows |
|
Power requirements |
100 to 120 VAC, 50/60 Hz;
220 to 240 VAC, 50 Hz (please specify when ordering) |
|
Power consumption |
Within 120 VA |
|
Operating environment |
+50° to +95°C, 35% to 75% RH (non-condensing) |
|
Approximate external dimensions
(W x D x H) |
33.8 in. x 30.7 in. x 7.9 in.
(857 mm x 780 mm x 200 mm)
46.2 in. x 38 in. x 7.9 in.
(1172 mm x 964 mm x 200 mm) |
46 in. x 37.8 in. x 7.9 in.
(1172 mm x 960 mm x 200 mm) |
|
Approximate weight |
42
lbs.*6
(19 kg.)
57 lbs. *6
(26 kg.) |
59.5
lbs.*6
(27 kg.) |
