Go back

Summa Downloads

Windows� Setup FileSumma Cutter ControlT 4.3 for Windows�
(2.1 MB - Updated 10-Apr-02) - Software interface for adjusting all Summa cutter parameters, including speed, mode, pressure, blade offset and much more. Supports Windows 95/98/2000/NT/Me, and is compatible with all SummaSign� Pro brand cutters, as well as DuraCutT by WestCompT.

Note: Requires firmware revision 5 or newer (download below if needed).


Stuffit ArchiveSumma Cutter ControlT 2.1 for Macintosh�
(448KB MB - Updated 13-Sep-00) - Software interface for adjusting all Summa cutter parameters, including speed, mode, pressure, blade offset and much more. Recommended for use with newer MacOS versions; compatible with all SummaSign� Pro brand cutters, as well as DuraCutT by WestCompT.

Note: Requires firmware revision 5 or newer (download below if needed).

Requires: StuffitT ExpanderT (free download) to unarchive.


Self-extracting Zip FileFirmware Revision 20 for SummaSign� Pro cutters
(377KB - Updated 26-Mar-03) - The latest internal programming for all SummaSign� Pro plotters, as well as DuraCutT by WestCompT. Adds the new OptiCutT feature to D-SeriesT (or T-SeriesT cutters when plotting in drag-knife mode) and includes other enhancements (self-extracting Zip� archive).

Home | Vinyl Cutters | Printers | Software | Heat Presses | Board Cutters | Laminators | Consumables | Service/Repair | About Us | Special Offers

Follow us on Facebook
 
rolandrowlandheatpressesheat pressvinyl cuttersignmakersign makersign cuttersignmakingprint and cutsign printersummajavelinsign board cuttersstikacamm1signmaking clipartsignmaking vector artversacamm Roland VS-300 Roland VS-420 Roland VS-540 UV printer mimaki UV printerroland metallic printer mimaki printersRoland-VS-640-metallic-printerRoland-XC-540MT