Roland Professional Vinyl Cutters
CAMM1 PRO GX-300 and GX-500
Now with 3 year on-site warranty

USB and parallel ports

Two models to choose from: 30 inches and 48

Automatic sheet cut function cuts off media

Front and rear media loading capabilities

Optional four roll hanger capacity

Easy-to-use front panel

32-bit RISC CPU for high-speed cutting

Normal, heavy and high-speed cutting

Unattended cutting for long signs

CutStudio™ software for Corel & Adobe®

Drivers. Windows® XP/Vista and Mac

Illustration of Roland CM-300

Sign makers with limited space will appreciate the GX PRO's ability to feed media from the front as well as the rear. It can also feed media backward for a specified page distance, then cut and feed the page forward. The GX PRO comes in three models - the 30-inch GX-300 and the 48-inch GX-500. Feature-rich sign-cutting software comes standard.

GX PRO Series Vinyl Cutters

Fast and Precise
A digitally controlled servomotor, curve smoothing function and 32-bit RISC CPU provide exacting high-speed cutting, with a maximum cutting speed of 33 in/sec. Three standard cutting modes - normal, heavy and high - provide optimum versatility.  For utmost agility and precision, the GX PRO cuts with a down force  between 20 and 350 grams.
Reliable and Easy to Use
Roland cutters are known worldwide for producing outstanding results year after year. A reliable  tracking system on the GX PRO lets sign makers cut long signs and  banners unattended. According to recent tests, the GX PRO will keep  vinyl lined up straight for 82 feet.
The new, easy-to-use front panel includes buttons for frequently used  settings such as blade force, cutting speed and origin point. The GX Series stores cutting conditions for up to eight pre-set jobs, including cutting speed, blade compensation, blade force, tool movement speed  during tool-up and cutting mode. It will also re-cut the previous job at the push of a button.



About Roland CutStudio™ Software

Every GX Series professional cutter  ships with Roland CutStudio™ - an Adobe® Illustrator® and CorelDraw®  Plug-in application.Cut Studio™ expands graphics capabilities by letting  users enlarge, reduce, re-position, rotate and mirror images. The  software lets users cut enlarged images as crisp as original size, cut  True Type fonts without outlining and preview multicolored images by  colour. It even creates overlays by selecting individual colours for  cutting. Roland CutStudio™ is compatible with Adobe® Illustrator® 9.0/10/CS or CorelDraw® 10/11/13/X3 on Windows® 2000/XP or Vista, Please ask about MAC


GX-300   GX-500
Mechanism Media-movement method
Driving  Method Digital  control servo motor
Maximum  Cutting Area

29" x 984-1/8"
(737mm x 24,998mm)

47" x 984-1/8"
(1,195mm x 24,998mm)

Acceptable Media Width

2" to 36"
(50mm to 915mm)

3-1/2" to 54"
(90mm to 1,372mm)

Cutting Speed

During cutting: 850 mm/sec. (in all directions)
During tool-up:  1,202mm/sec (in 45º direction)

Cutting  Force

20 to 350  gf

Mechanical Resolution

0.000492"/step (0.0125 mm/step)

Software Resolution

0.000984"/step (0.025mm/step)

Distance Accuracy

Error of less than ± 0.2% of distance traveled, or 0.000394 (0.1mm),  whichever is greater

Repetition Accuracy

0.1mm or less (excluding stretching/contraction of the material)
Range  for assured repetition accuracy
For materials with a width exceeding 24" (610mm): Length 157-7/16" (4,000mm) (CX-400/500  only)
For materials with a width of 24" (610mm) or less: Length  314-15/16" (8,000mm)


Parallel (Centronics compatible), USB (Rev. 1.1)

Buffer Size

2 MB (1.3MB for replot buffer)

Instruction System

CAMM-GL3 (mode1and mode2)

Power consumption

Maximum: 0.8 a/100 V to 240  V ± 10 % 50/60Hz

Acoustic noise level

Cutting mode: under 62 dB  (A) Standby Mode: under 40 dB (A) (According to ISO 7779)


45-1/16"(W) x 28-5/8"(D) x 43-13/16"(H)
1,144  mm (W) x 727 mm (D) x 1113 mm (H)

63-1/16"(W) x 28-5/8"(D) x 43-13/16"(H)
1,602  mm (W) x 727 mm (D) x 1113 mm (H)

Weight (with stand)

101.4lb. (46 kg)

130.1 lb. (58 kg)

Standard Accessories

Power Cord: 1, Blade (ZEC-U5025): 1, Blade Holder (XD-CH3): 1, Alignment tool: 1, Cable Clamp: 1, Replacement blade for separating knife: 1, Roland  software package: 1,
Startup Manual: 1, Safe Use Manual:  1

Roland - Succeeding together

road cycling and walking holidays in spain rolandrowlandheatpressesheat pressvinyl cuttersignmakersign makersign cuttersignmakingprint and cutsign printersummajavelinsign board cuttersstikacamm1signmaking clipartsignmaking vector artversacamm Roland VS-300 Roland VS-420 Roland VS-540 UV printer mimaki UV printerroland metallic printer mimaki printersRoland-VS-640-metallic-printerRoland-XC-540MT