ROLAND CUTTER AND PLOTTERS

OPOS

1. Design a colour logo using CorelDraw graphics software, generate a hairline around the image, this will be used as the cutline.

2. Print the image using an Epson Printer. (specialised inks may be needed)

3. place the image in to the Roland CX-24 and the Opos system automatically aligns and then cuts the hairline.

Go back


Home | Vinyl Cutters | Printers | Software | Heat Presses | Board Cutters | Laminators | Consumables | Service/Repair | About Us | Special Offers

Follow us on Facebook
 
rolandrowlandheatpressesheat pressvinyl cuttersignmakersign makersign cuttersignmakingprint and cutsign printersummajavelinsign board cuttersstikacamm1signmaking clipartsignmaking vector artversacamm Roland VS-300 Roland VS-420 Roland VS-540 UV printer mimaki UV printerroland metallic printer mimaki printersRoland-VS-640-metallic-printerRoland-XC-540MT