Signmaster Systems

An ENERGY STAR® Partner, Roland DG Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
ENERGY STAR is a U.S. registered mark.

Model		SP-300	SP-540
Printing/Cutting method		Piezo ink-jet method/media-moving method
Printing/Cutting width*¹		147 to 736 mm (5-13/16 to 29 in.)	Max 1346mm (53 in.)
Interface		USB interface	Network CAT5
Acceptable media width		182 to 762 mm (7-3/16 to 30 in.)	210 to 1371mm (8 to 54 in.)
Ink cartridges	Type	Exclusive ECO-SOL INK cartridge
	Capacity	220 cc ± 5 cc
	Color	The four colors cyan, magenta, yellow and black
Printing resolution (Printing dot resolution)		Max. 1440 dpi
Acceptable tool		Blade for CAMM-1 series
Cutting Speed		10 to 300 mm/s
Blade force		30 to 300 gf
Blade offset compensation		0.000 to 1.500 mm
Setting range of the preset temperature*²	Printing Heater	35 to 50°C
	Dryer	35 to 50°C
Software resolution (When cutting)		0.025 mm/step
Distance accuracy (Printing while using heater)		Error of less than ±0.4 % of distance traveled, or 0.5 mm, whichever is greater (in Roland SV-G-610G, print travel: 1 m, temperature: 20°C, humidity: 50 %, heater temperature setting: 40°C)
Distance accuracy (When cutting)*³		Error of less than ±0.4 % of distance traveled, or 0.3 mm, whichever is greater When distance correction ([CUTTING ADJ.] menu item) has been performed: error of less than ±0.2 % of distance traveled, or 0.1 mm, whichever is greater
Repetition accuracy (When cutting)*³		0.1 mm or less (excluding stretching/contraction of the media)
Repetition between printing and cutting*³		±0.5 mm max. at 25°C (excluding possible shift caused by expansion/contraction of the media and/or by reloading the media)
Power-saving function		Automatic sleep feature (compliant with the International ENERGY STAR® Office Equipment Program)
Power supply	Voltage and frequency	AC 100 to 120 V ± 10 % 50/60 Hz or AC 220 to 240 V ± 10 % 50/60 Hz
	Required power capacity	6.0 A (100 to 120 V) or 3.0 A (220 to 240 V)
Power consumption	Printing mode	Approx. 650 W
	Sleep mode	Approx. 29 W
Acoustic noise level	Printing mode	4 dB (A) or less (according to ISO 7779)
	Standby mode	40 dB (A) or less (according to ISO 7779)
Dimensions (With stand)		1720 [W] x 770 [D] x 1275 [H]	2390(W) x 800(D) x 1290(H)
Weight (With stand)		130 kg (287 lb.)	149 Kg (327 lbs)
Environment	Power on	Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), Humidity: 35 to 80 % (no condensation)
	Power off	Temperature: 5 to 40°C (41 to 104°F), Humidity: 20 to 80 % (no condensation)
Included items		stand, cleaning liquid cartridges, media flanges, small media clamps, large media clamps, blade, blade holder, replacement blade for separating knife, cleaning kit, CD-ROMs, power cord, manuals

*1 The length of printing or cutting is subject to the limitations of the program or driver.
*2 The heater temperature may not reach the preset temperature depending on ambient conditions or the width of the media.
*3 Accuracy is assured within a range in which the media-feed length is 3000 mm or less and expansion or contraction due to heater use is excluded. And the setting for heater use requires a warm-up period of about 5 minutes after powerup. (Time may vary depending on the operating environment.)