Mimaki UJV200-130
Turn urgent graphics into ready-to-finish UV prints
Mimaki UJV200-130 | UV Print Only Wide Format Printer
- 54-inch UV print-only — up to 1,360 mm print width for signs and graphics.
- Instant UV-LED curing — remove solvent outgassing from your workflow.
- White and Clear options — add opacity, gloss, matt detail and texture.
- 1-litre ELS-170 bottles — ink capacity for regular roll production.
- DAS2 automatic adjustment — make media setup easier.
- RasterLink7 included — prepare jobs and control ink-saving settings.
- Up to 22 m²/h — four-colour Draft mode; Standard colour output is 13 m²/h.
- Separate cutter workflow — print and cut different jobs at the same time.
Draft is not for PVC. Special inks and layered work run more slowly. Contour cutting needs a compatible separate cutter.
Mimaki UJV200-130 options & specifications
Choose the UJV200 width that fits your work
Why choose the Mimaki UJV200-130?
Need Advice?
Our team is here to help
Description
Description
Mimaki UJV200-130: 54-inch UV printing for faster turnaround
The Mimaki UJV200-130 is a wide-format UV-LED roll-to-roll printer for signs, window graphics, stickers, labels and interior décor. With up to 1,360 mm print width, it helps you bring everyday graphics production in-house and add specialist finishes without moving to a larger machine.
Spend less time waiting for prints
When deadlines are tight, finishing time matters as much as printing speed. UV-LED curing removes the solvent-outgassing stage, so suitable output can move into cutting, mounting or lamination sooner. We’ll help you check the complete material and finishing combination before committing to a production workflow.
Offer more than standard colour graphics
Choose CMYK for colour production, or specify White and Clear capability around your applications. White creates opacity on transparent film, while Clear adds gloss, matt detail or texture. Supported two- and three-layer printing opens up window and illuminated display work. Additional layers affect output speed, and Clear gloss requires media pull-back.
Make detailed work easier to repeat
The single 330 Engine printhead produces droplets from 4 pl for fine lettering, smooth tones and solid colour. DAS2 helps automate setup, while RasterLink7 gives you control over layouts, colour and ink-saving settings. Standard four-colour output is 13 m²/h; the 22 m²/h maximum applies to Draft mode on suitable banner or synthetic paper, not PVC.
Build a setup that fits your workload
This is a print-only machine. Add a compatible cutter for shaped decals and labels, allowing separate jobs to print and cut at the same time. Run by printers, for printers, we’ll help you choose inks, test materials and plan space, finishing and support around the work you want to win.
Which materials suit the UJV200-130?
Which materials suit the UJV200-130?
What can you print using the UJV200-130?
What can you print using the UJV200-130?
UJV200-130 workflow and ink options
UJV200-130 workflow and ink options
Mimaki UJV200-130 specifications
| Detail | UJV200-130 |
|---|---|
| Printer type | Roll-to-roll UV-LED print-only; separate cutter required for contour cutting |
| Print / media width | Maximum print width 1,360 mm; media width 210–1,370 mm |
| Printhead / resolution | Single piezo 330 Engine printhead; droplets from 4 pl; up to 1,200 × 1,200 dpi |
| Ink supply | ELS-170 UV ink in 1-litre bottles |
| Ink configurations | CMYK, CMYK + White, or CMYK + White + Clear; confirm the required setup before ordering |
| Four-colour Standard speed | 13 m²/h; 600 × 600 dpi, 6 passes |
| Four-colour maximum speed | 22 m²/h; Draft, 600 × 600 dpi, 4 passes. Draft is for suitable banner or synthetic paper, not PVC. |
| Special-colour configuration | Standard single-layer colour output: 6 m²/h; 1,200 × 600 dpi, 8 passes. Two-layer output is approximately half the single-layer figure. |
| Layered printing | Up to three layers in supported sequences. Clear gloss requires media pull-back; maximum pull-back length 1,000 mm. |
| Roll capacity | Standard: 25 kg, up to 180 mm diameter, 2-inch or 3-inch cores |
| Head gap | Manual selection: 1.5 or 2.0 mm |
| Production support | DAS2 automatic adjustment, nozzle recovery and take-up. NCU nozzle checking is optional. |
| Software | RasterLink7 RIP; Simple Create design software |
| Connections | USB 2.0 / Ethernet 1000BASE-T |
| Dimensions / weight | 2,520 × 748 × 1,405 mm (W × D × H); 155 kg |
| Installation space | At least 3,520 × 2,748 mm, plus PC space and suitable access |
| Power | Single-phase AC 200–240 V, 5.5 A, 50/60 Hz; maximum 1,320 W, standard 550 W |
| Operating conditions | 20–30°C; 35–65% RH, non-condensing. Accuracy range: 20–25°C |
Optional extras & upgrades
| Option | How it helps |
|---|---|
| NCU — optional accessory | Automatic nozzle checking to support output consistency. OPT-J0422; nozzle recovery is already included. |
| Ionizer 1300 — optional accessory | Help manage static on suitable media. OPT-J0463 requires the UJV200 Ionizer Connection Kit OPT-01038. |
| Level-foot option — optional accessory | Support media weights up to 45 kg with OPT-J0502. We’ll confirm the complete roll-handling configuration. |
| White / Clear ink — choose before ordering | Add opacity and decorative finishes. Choose the configuration around your work; do not assume later conversion. |
| Separate cutting plotter — additional equipment | Add a compatible Mimaki CG-AR workflow for shaped stickers and decals, using RasterLink7 ID Cut. |
| Laminating equipment — additional equipment | Choose a suitable laminator where the finished application needs protection. We’ll check ink, film and laminate compatibility. |
Speeds depend on ink configuration, media and print mode, and exclude loading and finishing. We’ll check your complete setup before quoting.
Help me choose the right setupSee your own artwork on the UJV200-130
Need Advice?
Our experts are always on hand
Other options available
Request a Quote?
Contact Us for the best deals
Mimaki UJV200-130 questions answered
Does the Mimaki UJV200-130 cut as well as print?
Does the Mimaki UJV200-130 cut as well as print?
How wide can the UJV200-130 print?
How wide can the UJV200-130 print?
How fast is the UJV200-130?
How fast is the UJV200-130?
Can it print White ink and Clear effects?
Can it print White ink and Clear effects?
Do UV prints need to dry before finishing?
Do UV prints need to dry before finishing?
How much space does the UJV200-130 need?
How much space does the UJV200-130 need?




