Siser Brick 600 Dual Colours | Cut-Only Heat Transfer Vinyl

Siser Brick 600 Dual Colours | Cut-Only Heat Transfer Vinyl Overview

Siser Brick 600 Dual Colours HTV is a 600 micron PU heat transfer vinyl with a distinctive two-tone construction.

The contrasting base and top colours create a raised three-dimensional appearance after application.

This makes it ideal for bold garment graphics where depth and visual impact are important.

Two-Tone 3D Construction

Brick 600 Dual Colours combines two contrasting colours within one thick PU construction.

The different base and top colours create a visible edge around the finished design.

This produces a stronger dimensional effect than conventional flat heat transfer vinyl.

600 Micron PU Film

Siser Brick 600 Dual Colours uses a substantial 600 micron polyurethane face film.

The thicker construction creates the raised finish associated with the Brick 600 range.

It is designed for garment graphics that need noticeable depth and structure.

Black and White Colour Combinations

Current live variants are available in Black/White and White/Black combinations.

The contrasting colour construction highlights the edge of the transferred design.

This is particularly effective for bold lettering, logos and graphic shapes.

Designed for High-Impact Garment Graphics

The raised two-tone effect gives designs a more prominent appearance.

It is suited to fashion, promotional garments, merchandising and statement graphics.

Simple and bold artwork generally suits thicker heat transfer materials best.

Compatible Garment Fabrics

The current specification lists 100% polyester and 100% cotton.

It is also suitable for poly/cotton blends.

Always test unfamiliar garments before full production.

Not for Dye-Sublimated Fabrics

The current product information states that Brick 600 Dual Colours is not suitable for dye-sublimated fabrics.

This restriction should be considered before selecting the garment.

155°C Application Temperature

The current application temperature is 155°C.

The stated pressing time is 25 seconds.

Medium pressure of approximately 4 bar is recommended.

Cold Peel Application

The current product specification requires the carrier to be removed cold.

Allow the transfer to cool before removing the carrier.

Cutting and Weeding

The current specification recommends a 60-degree blade.

A cut pressure of approximately 80g is listed.

Always confirm final cutter settings before beginning production.

Non-Adhesive Polyester Liner

Brick 600 Dual Colours is supplied on a non-adhesive polyester liner.

Handle cut and weeded graphics carefully before pressing.

Laser-Friendly Material

The current product information identifies Brick 600 Dual Colours as laser friendly.

Follow the equipment manufacturer’s guidance when using laser cutting equipment.

500mm Width and Multiple Roll Lengths

All current live variants are 500mm wide.

Available roll lengths are 1 metre, 5 metres, 10 metres and 25 metres.

Both current colour combinations are available across the full size range.

Professional 3D Garment Decoration

Siser Brick 600 Dual Colours combines substantial thickness with a contrasting two-tone edge.

It is designed for garment graphics where a strong raised effect is required.

Run by printers, for printers.

Check out our YouTube channel for videos on different heat transfer vinyls