Siser Digibrick | Printable Heat Transfer Vinyl

Siser Digibrick | Printable Heat Transfer Vinyl Overview

Siser Digibrick is a high-thickness printable heat transfer vinyl for bold, full-colour garment decoration.

Its 750-micron construction creates a raised finish that adds visible depth to printed graphics.

Siser printable heat transfer vinyl supports professional print-and-cut workflows using compatible digital printing systems.

Choose Digibrick when standard flat transfers need greater visual impact and a distinctive dimensional effect.

Built for Raised Full-Colour Graphics

Digibrick combines digital print capability with a substantial polyurethane film for dimensional garment graphics.

The extra thickness helps logos, lettering and artwork stand above the garment surface after application.

This creates a bold 3D appearance suited to branding, fashion graphics and statement garment decoration.

The raised profile gives decorated clothing a noticeably different finish from conventional printable HTV.

750-Micron Polyurethane Construction

Siser specifies an average thickness of 750 microns for Digibrick.

The polyurethane construction provides the substantial profile required for its characteristic raised finish.

Siser identifies Digibrick as REACH compliant and VeganOK certified.

It also carries OEKO-TEX Standard 100 Class II certification.

Digital Print Compatibility

Siser Digibrick is compatible with solvent, eco-solvent and UV-based inks.

Print the required artwork before contour cutting the finished design with suitable print-and-cut equipment.

The printable surface supports detailed logos, photographs and multi-colour artwork for professional garment production.

This makes Digibrick suitable for businesses producing distinctive personalised and branded apparel.

Suitable Garments

Siser specifies Digibrick for 100% cotton, 100% polyester and poly/cotton blended fabrics.

It is not recommended for dye-sublimated fabrics.

Always test unfamiliar or treated textiles before beginning a full production run.

Cutting Settings

Siser recommends a 60-degree blade with approximately 90 to 100gf cutting pressure.

Perform a test cut before production to confirm clean contour cutting and straightforward weeding.

Remove unwanted material carefully before applying suitable application tape to the finished graphic.

Heat-Press Application

Apply Siser Digibrick at 155°C for 25 seconds.

Use medium-high pressure of approximately 3 to 4 bar.

Remove the application tape while hot after pressing.

Garment Care

Wait at least 24 hours after application before washing the finished garment.

Siser permits washing at temperatures up to 60°C.

Tumble drying is permitted using a cotton cycle.

Do not dry clean, bleach or use aggressive chemical cleaning agents.

Choose Your Siser Digibrick

Choose the required roll length from the available 500mm-wide options above.

Choose Digibrick for printed garments requiring bold colour, substantial thickness and a raised dimensional finish.