Siser PS Metallic | Cut-Only Heat Transfer Vinyl

Siser PS Metallic | Cut-Only Heat Transfer Vinyl Overview

Siser PS Metallic heat transfer vinyl is a 100 micron PU film with a distinctive metallic finish.

It is available in Gold and Silver for bold garment graphics and decorative textile applications.

The material is designed primarily for strong, single-layer designs.

Gold and Silver Metallic Finish

PS Metallic provides a high-impact metallic appearance for cut garment graphics.

Current live variants are available in Gold and Silver.

The finish is particularly suited to bold logos, lettering and statement designs.

100 Micron PU Construction

Siser PS Metallic uses a 100 micron polyurethane face film.

The material is supplied on an adhesive polyester liner.

This supports controlled cutting, weeding and positioning before heat application.

Designed for Single-Layer Graphics

The current product information recommends PS Metallic primarily for single-layer applications.

This helps preserve the distinctive metallic finish and appearance.

For layered graphics, PS Metallic should only be used as the top layer.

Best for Medium and Large Cuttings

The current product guidance recommends medium and large cut designs.

This makes PS Metallic well suited to bold logos and prominent garment graphics.

Very small or intricate designs may not suit the material’s construction.

Avoid Bending After Application

The current product information advises against bending the finished application after transfer.

This helps protect the appearance of the metallic surface.

Consider the garment area and expected movement before application.

Compatible Garment Fabrics

The current specification lists 100% polyester and 100% cotton.

It is also suitable for poly/cotton blends.

Always test unfamiliar garments before starting a full production run.

160°C Application Temperature

The current application temperature for PS Metallic is 160°C.

The stated pressing time is 15 seconds.

Medium pressure of approximately 3–4 bar is recommended.

Cold Peel Application

The current product specification requires the carrier to be removed cold.

Allow the application to cool before removing the polyester carrier.

Following the correct peel method supports a consistent finish.

Cutting and Weeding

The current specification recommends a 60-degree blade.

A cut pressure of approximately 130g is listed.

Always confirm suitable settings for the installed cutter before production.

Laser-Friendly Material

The current product information identifies PS Metallic as laser friendly.

Follow the equipment manufacturer’s operating guidance when using laser cutting equipment.

500mm Width and Multiple Roll Lengths

All current live PS Metallic variants are 500mm wide.

Available roll lengths are 1 metre, 5 metres, 10 metres and 25 metres.

Both Gold and Silver are available across the current size range.

Professional Garment Decoration

Gold and silver metallic HTV provides a premium visual effect for suitable garment graphics.

PS Metallic combines bold appearance with straightforward cut-only production and heat application.

Run by printers, for printers.

Check out our YouTube channel for videos on different heat transfer vinyls