Roland TA2-Ink | TrueVis Resin Ink

Roland TA2-Ink | TrueVis Resin Ink Overview

Roland TA2-Ink | TrueVis Resin Ink is a resin ink range developed for the Roland TrueVIS AG-640 printer.

The range supports professional print-and-cut production with colour, white ink and finishing capabilities for suitable graphics applications.

Signmaster supplies 750cc variants covering CMYK, Red, Orange, White and Optimiser.

A separate Cleaning Liquid variant is also listed on this product page.

Roland TrueVIS AG-640 Resin Ink

TA2 resin ink is listed for the Roland TrueVIS AG-640 wide-format printer.

It is intended for use within the printer's specified ink configuration.

Check your installed ink family and printer model before ordering replacement consumables.

Roland TA2-Ink should not be confused with the earlier Roland TA ink range.

Always confirm the correct product code before fitting a new cartridge or pouch.

Rich Colour and Detailed Graphics

The existing product information highlights improved CMYK colour performance, alongside additional Red and Orange inks.

High-density Black is described as supporting stronger contrast and deeper printed blacks.

These capabilities are relevant to graphics requiring consistent colour reproduction.

Actual results depend on printer settings, media and artwork preparation.

Follow the recommended colour-management workflow for the application.

White Ink for Specialist Applications

Roland TA2 White ink is intended for suitable graphics using transparent or coloured materials.

The existing product description identifies high-density white printing as a key benefit.

It also describes a white ink circulation system intended to reduce waste and maintenance requirements.

Correct white ink performance depends on the printer configuration and operating procedures.

Follow Roland guidance when maintaining the white ink system.

Lower-Temperature Resin Printing

The original specification highlights lower curing temperatures and improved finishing flexibility.

These characteristics can support production on appropriately tested materials.

The existing listing also describes scratch resistance comparable to certain overcoated latex prints.

That comparison does not establish identical performance for every media or application.

Always verify finished print durability against the intended use.

Available TA2 Ink Variants

Signmaster currently lists eight printing consumables:

• Cyan — 750cc
• Magenta — 750cc
• Yellow — 750cc
• Black — 750cc
• Red — 750cc
• Orange — 750cc
• White — 750cc
• Optimiser — 750cc

Select the consumable required by the printer's installed configuration.

Optimiser performs a different function from the listed colour inks.

Separate Cleaning Liquid

A 750cc Cleaning Liquid variant is also available on this product page.

Cleaning liquid is a maintenance consumable rather than a printing ink.

Use only the cleaning products specified for the printer and maintenance procedure.

Do not install cleaning liquid in place of an ink consumable.

Check the product code before ordering.

Media and Finishing Applications

Roland TA2 resin ink is relevant to professional signage and graphics production.

The existing listing highlights a more natural finished appearance on suitable media.

Material compatibility, curing and durability depend on the complete printing configuration.

Test media before undertaking larger production runs.

Follow the manufacturer's instructions for finishing and handling.

Ordering and Expiry Information

The existing product information specifies a minimum two-month expiry-date allowance.

It also warns that incorrectly ordered inks may incur a restocking charge.

Confirm the printer model, ink family, colour and capacity before ordering.

Professional Roland Supplies from Signmaster

Signmaster supplies Roland inks, maintenance consumables and professional wide-format printing equipment.

Contact our team for help identifying the correct consumables for your printer.

Run by printers, for printers.